網站公告:

新聞中心

濟南精拓流體設備有限公司

電話:0531-69951198

郵箱:jingtuolt@163.com

傳真:0531-69951198

地址:濟南市歷城區西周南路9號

網址:http://www.9015c.com

常見問題

當前位置:首頁 - 新聞中心 - 常見問題 - 增壓泵使用長久后會出現故

增壓泵使用長久后會出現故障的表現形式

發布時間:2022-07-11 17:09:29   發布人:http://www.9015c.com
氣液增壓泵在使用一段時間后會出現增壓泵不工作或者上壓慢等故障。現在小編就將氣液增壓泵常見的幾種故障通過表現來分析出現這種情況的原因和解決方法告訴大家。
After using the gas-liquid booster pump for a period of time, the booster pump will not work or the pressure will be slow. Now Xiaobian will analyze the causes and solutions of several common faults of gas-liquid booster pump through performance.
1.故障表現:當驅動氣液壓力不低于20psi時,驅動部分不工作或不循環。
1. Fault performance: when the driving gas-liquid pressure is not less than 20psi, the driving part does not work or does not cycle.
可能原因:供氣管路堵塞或供氣量不足;空氣循環閥堵塞;排放口結冰;消聲器堵塞。
Possible causes: the air supply pipeline is blocked or the air supply is insufficient; The air circulation valve is blocked; The discharge port is frozen; The muffler is blocked.
解決方法;檢查氣液供應管道和空氣調壓閥;拆卸空氣循環閥,并使用允許溶劑進行清洗;驅動氣液水含量較高,改用更好的干燥設備;將消聲器拆卸下來清洗。
resolvent; Check the gas-liquid supply pipeline and air pressure regulating valve; Disassemble the air circulation valve and clean it with permitted solvent; The water content of the driving gas-liquid is high, so better drying equipment should be used; Disassemble the muffler for cleaning.
2.故障表現:在負載情況下,驅動部分不工作,并在換向排氣口有連續氣液排出。
2. Fault performance: under load, the driving part does not work, and there is continuous gas-liquid discharge at the reversing exhaust port.
可能原因:換向針的彈簧破壞或不適合;換向針末端O型圈不適合或失去作用。
Possible causes: the spring of the reversing needle is damaged or unsuitable; The O-ring at the end of the reversing needle is not suitable or loses its function.
解決方法;置換彈簧;置換O型圈。
resolvent; Displacement spring; Replace the O-ring.
3.故障表現:驅動部分不工作;消聲器泄露空氣。
3. Fault performance: the driving part does not work; The silencer leaks air.
可能原因:驅動氣液流量不足;空氣循環閥芯的密封收縮或損壞。
Possible cause: insufficient driving gas-liquid flow; The seal of the air circulation valve core shrinks or is damaged.
解決方法;提高驅動氣液流量;首先檢測空氣循環閥芯的密封,如果損壞,更換并組裝重新測試;如果沒有損壞,檢查驅動部分密封。
resolvent; Increase the drive gas-liquid flow; First, check the seal of the air circulation valve element. If it is damaged, replace it, assemble it and retest it; If there is no damage, check the drive part seal.
氣液增壓泵
4.故障表現:驅動部分工作,但氣液沒有增壓。
4. Fault performance: the driving part works, but the gas and liquid are not pressurized.
可能原因:氣液壓縮部分的單向閥密封或高壓部分損壞。
Possible cause: the one-way valve seal or high-pressure part of the gas-liquid compression part is damaged.
解決方法;檢查單向閥及高壓端。
resolvent; Check the check valve and high-pressure end.
氣液增壓泵體系在挑選的時候需求注意哪些事項呢?
What should we pay attention to when selecting the gas-liquid booster pump system?
1、確定自己的現場驅動氣壓與被增壓介質的進口壓力。
1. Determine your own on-site driving air pressure and the inlet pressure of the pressurized medium.
2、了解自己所需的高運用壓力、及工裝的常用壓力。
2. Know the high operating pressure you need and the common pressure of tooling.
3、別的對自己現場運用的工況也要有一個清晰的知道、比如說流量的需求。往往流量是一個氣液增壓能否被客戶運用的一個重要因素。
3. In addition, you should also have a clear understanding of the working conditions used on site, such as the flow demand. Often, flow is an important factor for whether a gas-liquid pressurization can be used by customers.
以上就是今天為大家介紹的關于問題以及注意事項的全部內容,希望對大家能有所幫助,想要了解更多內容可以電話聯系我們或者關注我們的網站http://www.9015c.com,我們的工作人員會及時與您取得聯系。
The above is all about the problems and precautions introduced to you today. I hope it can help you. If you want to know more, you can contact us by phone or follow our website http://www.9015c.com , our staff will contact you in time.
新聞推薦:
增壓泵在沒有水的情況下不停止工作原因 2022-07-18
增壓泵使用長久后會出現故障的表現形式 2022-07-11
訂購到滿意的增壓泵就要知道參數及其他 2022-07-04
關于氣液增壓泵的正確打開認識方式 2022-06-22
增壓泵怎樣安裝?有什么安裝常見問題? 2022-06-15
講解增壓泵產品九大特點 2022-06-08
氣體增壓泵要加一個氣罐的原因 2022-05-30
選擇氣體泄漏檢測儀時要了解實際情況 2022-05-27
氣體增壓泵和氣液增壓泵兩種設備可不能... 2022-05-23
氣體增壓系統典型應用的相關內容 2022-05-18

13188935873

qq

熟女av,各种作爱视频,国产乱子伦一级A片观看,第九色